SN74LS166 8位移位寄存器

2019年12月4日 - 0 Comments

SN74LS166移位寄存器IC

SN74LS166Shift Register Pinout

The SN74LS166AN is an 8-bit parallel-load serial-out Shift Register compatible with most other TTL logic families. This parallel-in or serial-in, serial-out shift register has a complexity of 77 equivalent gates on a monolithic chip. It features gated clock inputs and an overriding clear input. The parallel-in or serial-in modes are established by the shift/load input.

Pin Description of SN74LS166:

Pin Number	Pin Name	Description
2, 3, 4, 5,10,11,12,14	A to H	并行数据输入。上的数据se inputs are asynchronously entered in parallel into the internal flip–flops when the Serial Shift/Parallel Load input is low
13	Q_H	Complementary Shift Register output Pin
1	SER	Serial Input Pin. When the Serial Shift/Parallel Load input is high, data on this pin is serially entered into the first stage of the shift register
6, 7	CLK INH & CLK	Clock inputs. These two clock inputs function identically
9	CLR	Clear pin
15	SH/LD	Data–entry control input.
8	VSS	Ground
16	VCC	Supply Voltage – 5V, 10V, 15V

Features of SN74LS166:

8-bit,Serial/Parallel to Serial Shift register
Operating Voltage: 3V to 18V
Supply Voltage - Max:5.25 V
Propagation Delay Time: 25 ns
最大限度。时钟频率：35MHz
Operating Temperature Range: 0C to + 70 C
Available in 16-pin PDIP, GDIP, PDSO packages

Note:Complete Technical Details can be found at theSN74LS166datasheet give at the end of this page.

替代转移寄存器：

Name	Type
74LS379	Quad Parallel Shift Register
4014	4 Bit static shift register
CD4035	8 Bit Shift Register
74LS323	8 Bit Shift/Storage Register
74LS164	S / P Shift寄存器
74HC595	双4位静态寄存器
74LS299	8 Bit Shift/Storage Register

Where to use SN74LS166 IC

The SN74LS166 has an 8-bit parallel in or serial-in, serial-out Shift Register. Meaning it can receive (input) get data serially or parallel and control output pins in Serial. This comes in very handy where one doesnot have enough GPIO pins on our MCU/MPUto control the required number of outputs. It is often used in projects where relatively a large number of LEDs have to be controlled through the Microcontroller. It can also be used to interface the LCD screen since it can act as the data bit for theLCD displays.

How to use SN74LS166

The SN74LS166 shift register is commonly used with microcontrollers or microprocessors to expand the GIPO functionalities. SN74LS166 needs 4 lines of a microcontroller. One for the Clock, one to the enable the clock, one for shifting the bits, and one for the serial data transfer. To useSN74LS166with microcontroller connect these four pins (SER, CLK INH & CLK, and SH/LD) to GPIO pins of the microcontroller. Input pins (A to H) can be connected to some type of input like buttons, switches, etc.