LM324 Quad OP-AMP IC

LM324 Op-Amp Pin Configuration

Pin Number	Pin Name	Description
1	OUTPUT1	Output of Op-Amp 1
2	INPUT1-	Inverting Input of Op-Amp 1
3	INPUT1+	Non-Inverting Input of Op-Amp 1
4	VCC	Positive Supply Voltage
5	INPUT2+	Non-Inverting Input of Op-Amp 2
6	INPUT2-	Inverting Input of Op-Amp 2
7	OUTPUT2	Output of Op-Amp 2
8	OUTPUT3	Output of Op-Amp 3
9	INPUT3-	Inverting Input of Op-Amp 3
10	INPUT3+	Non-Inverting Input of Op-Amp 3
11	VEE,GND	Ground or Negative Supply Voltage
12	INPUT4+	Non-Inverting Input of Op-Amp 4
13	INPUT4-	Inverting Input of Op-Amp 4
14	OUTPUT4	Output of Op-Amp 4

LM324 Quad Op-Amp IC Features and Specifications

• Integrated with four Op-Amps in a single package
• Wide power supply Range

1. Singe supply – 3V to 32V
2. Dual supply – ±1.5V to ±16V

• Low Supply current – 700uA
• Single supply for four op-amp operation enables reliable operation
• Operating ambient temperature – 0˚C to 70˚C
• Soldering pin temperature – 260 ˚C (for 10 seconds – prescribed)

LM324 Equivalent Quad Op-Amp ICs

LM3900, LMC660,LM339, LT014,LM2900, LM324A, LM324E, LM324-N, LM324W

Brief Description

LM324is aQuad op-amp ICintegrated with four op-amps powered by a common power supply. The differential input voltage range can be equal to that of power supply voltage. The default input offset voltage is very low which is of magnitude 2mV. The operating temperature ranges from 0˚C to 70˚C at ambient whereas the maximum junction temperature can be upto 150˚C. Generally, op-amps can perform mathematical operations.

LM324 Explanation with Example

考虑,用可变负荷运行的电动机。一个s the load increases the current increases which in turn increases the temperature of the motor. So, our job is to shut down the system if the temperature increases beyond rated. This is the place where op amp operates as a positive comparator. Check outDifference between Op-Amp and Comparator. Here athermistordoes the job whose resistance varies with temperature.

Below will be a simple circuit connection to sense temperature and control a system.

一个t Temperature = 25˚C, RT=10kὨ. Inv Input=1.32V and Non-Inv Input=2.36V.

Thus, Output is HIGH and it can drive a motor ON through a transistor or relay.

一个t Temperature = above 70˚C, RT=3kὨ. Inv Input=1.32V and Non-Inv Input=1.06V.

Thus, Output is LOW and it can drive a motor OFF through a transistor or relay.

If the temperature is to be monitored at three or four positions of the motor then LM324 can be used in below configuration. An orientation example for two temperature sensing RT1 and RT2,

Supply connection:

Single Supply Connection

Dual Supply Connection

一个bove is the supply configuration for both single and dual supply connections.

应用程序:

• Transducer Amplifiers
• Filter circuits, Voltage followers
• Integrator, Differentiator, Summer, adder, Voltage follower, etc.,
• DC gain blocks
• Comparators (Loop control & regulation)

2D-model