PAM8403 Stereo Audio Amplifier Module

19 October 2020 - 0 Comments

PAM8403 Stereo Audio Amplifier Module

PAM8403 Stereo Audio Amplifier Pinout

PAM8403 is an Amplifier Board which can be powered using simple 5V input and could drive two3W + 3Wstereo speakers. It is an excellent choice, who wants aClass-Dstereo audio amplifierin small board space. This Amplifier allows the user to achieve high-quality audio reproduction from a stereo input. Additionally, it has a special feature that is, it can drive speakers directly from its output.

Pin Description of PAM8403 Amplifier Board

Pin Name	Description
L	Audio Jack (TRS-Tip) Left Channel Input
Gnd	Audio Jack (TRS-Sleeve) Ground Channel Input
R	Audio Jack (TRS-Ring) Right Channel Input
5v(+)	5v DC Power VDD
5v(-)	5v DC Power GND
L(+)	Left Channel Positive Output
L(-)	Left Channel Negative Output
R(+)	Right Channel Positive Output
R(-)	Right Channel Negative Output

Alternatives for PAM8403:PAM8406,TDA7265

Other Audio Amplifier ICs:LM386,LM380,LM4871,TDA2030,LM1875

Features ofPAM8403 Amplifier Board

Operating Voltage: Wide power supply ranges from 2.5V to 5.5V DC
Dual-channel stereo with high output power (3W+3W Output at 10% THD with a 4Ω Load @5v DC)
Max Gain 24 dB.
Filterless architecture
Low Quiescent Current and Low EMI
Operating Temperature: -40 to +85°C
Short Circuit Protection
Thermal Shutdown
Superior Low Noise
Efficiency up to 90%
Dimensions (LxWxH) in cm 2.1 x 1.8 x .3

Note: Complete technical details can be found in thePAM8403 Datasheetlinked at the bottom of this page.

PAM8403 Amplifier Board

The main power Amplifier IC is the PAM8403, as you can see, the below image other than the IC, the module consists of a few components like capacitors and resistors.

PAM8403 Amplifier Board

The PAM8403 amplifier board is a dual-channel (stereo) amplifier that produces6W(3W+3W) output. As any major amplifier system needs to have short circuit protection, PAM8403 has inbuilt short circuit protection that is essential for trouble-free operations. PAM8403 Amplifier IC itself does not require any kind of heat sink, so this will be a perfect choice for custom speaker projects. It can directly drive4Ω or 8Ωspeakers. It is mandatory to use a proper speaker with not more than a 3W output rating.

As this is a stereo amplifier board, the input section has two input L (Left) and R (Right) with a common ground in between them. Use any kind of audio input that needs to be amplified and it will produce3W + 3Waudio output.

This amplifier module provides a maximum gain of24 dBwith官10%at 5V DC input and 4 Ohms load output. It does not require heatsink which also saves additional board space. Irrespective of the heatsink, it could also provide thermal protection which is another essential feature for such a small wattage amplifier module.

PAM8403 Amplifier Board Interfacing Diagram

Circuit diagram for interfacing with two 3W speakers with the PAM8403 Amplifier Board is given below. The PAM8403 Amplifier Board can be powered using any voltage ranging from 2.5V to 5V DC. But it is recommended to use 5V input for maximum output performance.

PAM8403 Amplifier Board Interfacing