MPSA06 NPN Amplifier Transistor
TheMPSA06is an 80V 500mA general purpose NPN transistor with a maximum gain value of 100. This makes the transistor suitable for amplifier applications.
Pin Configuration
Pin Number |
PinName |
Description |
1 |
Emitter |
Current Drains out through emitter, normally connected to ground |
2 |
Base |
Controls the biasing of transistor, Used to turn ON or OFF the transistor |
3 |
Collector |
Current flows in through collector, normally connected to load |
Features
- General Purpose NPN Transistor
- 直流电流增益(hFE) 100
- Continuous Collector current (IC) is 500 mA
- Collector-Emitter voltage (VCE) is 80V
- Collector-Base voltage (VCB) is 80V
- Transition Frequency: 100MHz
- Available in To-92, SOT-23 and SOT-223 Package
Note:Complete Technical Details can be found at theMPSA06 datasheetgiven at the end of this page.
Complementary PNP Transistor:MPSA56
MPSA06 Equivalent NPN Transistor:2SC2882, BC387, 2N4401
Where to use MPSA06
TheMPSA06is a general purpose NPN transistor that is commonly used in Amplifier applications. The Transistor can switching voltages up to 80V with a current value of less than 500mA, making it suitable for lower power switching applications. It also has a gain value of 100 and is most commonly used in Audio Amplifier circuits.
This NPN transistor also has its counterpart PNP transistor the MPSA56, which makes it ideal for Push-pull and class B amplifier designs. Apart from this the transistor can also be used for switching low power devices.
Applications
- General purpose switching
- Class B amplifiers
- Pre-amplifier circuits
- Push-Pull configuration circuits
2D-Model
2D dimensions will help you in placing this component at the time of making circuit on perf board or a PCB.
